Can I run all four outlets at the same time?
Yes. Each piano key works on its own, so the overhead shower, hand shower, spray gun and spout can run together in Spa Mode. For all outlets together, we recommend 40 PSI (about 2.8 bar) at the inlet from a standard pressure pump (1.5 HP, 24-litre tank).
Do I need a pressure pump for this shower panel?
Water pressure is low without a pump. We recommend 40 PSI (about 2.8 bar) at the inlet from a standard pressure pump (1.5 HP, 24-litre tank). The panel works from 1 to 12 bar. The pump is not in the box.
Does the Ripple shower panel work with my geyser?
Works with storage geysers. Not suitable for tankless (flow-activated) instant water heaters. The maximum hot water temperature is 75 °C.
Can I install it if I have no hot water supply?
Yes. Connect two cold supplies in place of hot and cold.
Will it fit the points of my existing wall mixer?
Yes, if they are standard 1/2 Inch (15 mm) wall points with centres from 150 to 185 mm. The Easy-Fit Legs connect the panel's 3/4 Inch (20 mm) inlets to these points, at standard mixer point height (No-Break Upgrade).
How do I set the water temperature?
Turn the temperature lever on the panel to mix hot and cold water, then press the piano key for the outlet you want.
Can the spray gun be used as a health faucet?
Yes. The 2-in-1 Spray Gun is stainless steel with 2 buttons, and you can use it for cleaning or as a health faucet.
What is this shower panel set made of?
The panel has a Solid Brass Core (low-lead brass). The pole and shower arm are 304-grade stainless steel, the overhead shower and hand shower are ABS, the spray gun is stainless steel and the Hose Tubes are PVC with 304-grade steel nuts.
How high can I fit the overhead shower?
The Height-to-Fit Pole sets the overhead shower 750–1,400 mm above the inlets. The overhead shower reaches 340 mm from the pole centre and swivels 360°.
Is it suitable for hard water?
Yes. Hard water shortens the life of the valve parts inside the panel. Rub the Rub-Clean Nozzles to clear scale and wipe the panel dry after use. Do not use acid.
What do I need besides what is in the box?
All Fitting Parts in the Box. You will also need Teflon tape for the leg threads, and a pressure pump if your water pressure is low.
Is installation available?
Home Installation ₹2,199, available in serviceable cities. See the installation section of the Warranty T&C page.
What warranty does the Ripple shower panel set have?
Up to 5-year warranty. Free onsite service for the first year, and free replacement parts for the full warranty period. See the Warranty T&C page.
