What size is the Stark toilet paper holder?
The Stark toilet paper holder with shelf measures 140 mm wide, 96 mm deep and 90 mm high (5.5 x 3.8 x 3.5 in). The shelf is 140 x 96 mm (5.5 x 3.8 in), and the 125 mm (4.9 in) roll arm sits 63 mm (2.5 in) out from the back plate. Overall size, shelf, roll arm length and arm depth ±5 mm.
How much does the Stark holder weigh?
The Stark holder weighs 265 g (±5%); its packed weight is 365 g (±5%).
What is the Stark holder made of?
304-Grade steel, end to end – back plate, shelf, roll arm and end cap all 304-Grade stainless steel. The back plate and shelf are bent from one 0.8 mm steel sheet, with no welded joint. The screws in the box are stainless steel.
Is the Stark holder chrome plated?
No. Stark is made of mirror-polished 304-Grade steel – the shine is polished into the steel itself, so there is no plating that can peel or flake.
Does the Stark holder rust?
Stark is made of rust-resistant 304-Grade stainless steel. It has a self-healing chromium shield – the 18% chromium in 304-Grade steel forms an invisible layer that resists rust and re-forms if scratched. To keep it looking new, wipe it dry after cleaning and do not use bleach, ammonia, chlorine, alcohol, industrial solvents, scouring powder, steel wool or wire brushes.
Does it fit jumbo toilet rolls?
Yes. It has a jumbo-ready 125 mm arm – takes standard and jumbo household rolls. It is not made for kitchen towel rolls.
Will my phone fit on the shelf?
Stark has a phone-ready top shelf – a 140 x 96 mm shelf above the roll keeps your phone within reach; made for a phone and small, light items. A very small plant pot fits too, but the shelf is not meant for heavy objects. Shelf size ±5 mm.
Can I fit it on the left side of the toilet?
Yes, as long as there is free wall space to the right of the holder. The roll arm opens on the right side only, so rolls slide on from the right; the holder cannot be fitted the other way round.
Does it need drilling?
Yes. Stark fixes to the wall with 2 stainless steel screws and 2 PVC dowels (gitti), both in the box. The two screw holes are 108 mm (4.3 in) apart. There is no adhesive option, and the screw heads stay visible on the back plate.
Can it be fitted on tiles?
Yes. Stark suits brick, concrete and tiled walls. Drill two holes, push in the PVC dowels (gitti), screw the back plate in place and attach the roll arm with the Allen key. Prefer not to drill? Add Home Installation ₹799, available in serviceable cities (T&C).
Can Ruhe install it for me?
Yes. Home Installation ₹799, available in serviceable cities (T&C). Add it on this page when you order.
At what height should I fit it?
A common guideline is about 660 mm (26 in) from the floor to the centre of the roll, and 200 to 300 mm (7.9 to 11.8 in) in front of the front edge of the toilet. Sit on the toilet and check the reach before drilling.
What comes in the box?
1 paper holder, 2 stainless steel screws, 2 PVC dowels (gitti) and 1 Allen key (L-key), 2.5 mm.
How long will delivery take?
Stark is delivered to your door across India. Enter your pincode on this page to see the estimated delivery time for your area.
What is the warranty on the Stark holder?
2-year warranty. Free onsite service for the first year, and free replacement parts for the full warranty period.
Is onsite repair available in my city?
Free onsite repair is available in serviceable cities. See the full list on our Warranty T&C page.
How do I keep the mirror finish shiny?
Clean Stark with mild soap and water, using a soft cloth or sponge, and wipe it dry after cleaning to avoid water spots and mineral buildup. Do not use bleach, ammonia, chlorine, alcohol, industrial solvents, scouring powder, steel wool or wire brushes.
Where is Stark designed and manufactured?
Stark is designed and manufactured by Ruhe. Country of origin: India.
